Tech Process.

Boiler Feed Water Treatment  :   The process through which the dissolved gases are removed from water is called "Deaeration". The equipment, which is used in this method, is called "Deaerator".  Why do we use deaerators?...  Deaeration process is generally used to control corrosion in specific systems. The presence of dissolved gases, particularly oxygen and carbon dioxide, causes accelerated corrosion. The dissolved carbon dioxide in water forms a weak carbonic acid which attacks the metal in feed systems, boiler or condensate system. One of the most serious aspects of oxygen corrosion is that it occurs as pitting. https://lnkd.in/gHAyyrV PLEASE READ MORE..... Industrial Catalyst And Classification. Electrical Hazards And Precautions. Renewable, Sustainable, Clean, or Green Energy. What Is Renewable Energy Or Renewable Resources, Or Clean Energy? Standard Operating Procedure (SOPs) Of The Steam Turbine. What Is Vacuum Hazard? Power Plant And Types ...

As General Checklist List the Essential Steps and  for Pre start and Starting up the Centrifugal Pumps ⁉ ️   ️  What’s the things you Should be attention physically ⁉ ✅ General centrifugal pump start up procedure:-  Before pump start-up you must perform these tasks:-  1️⃣ Open the suction valve , do priming by venting all the air inside the suction line by opening any vent or even the PG vent till liquid coming out then close , now you confirm no air inside the system to reduce the chances of pump getting cavitation 2️⃣ Open any recirculation or cooling lines. 3️⃣ Fully close or partially open the discharge valve, depending on system conditions.  4️⃣ Start the driver. 5️⃣ Slowly open the discharge valve until the pump reaches the desired flow.  6️⃣ Check the pressure gauge to ensure that the pump quickly reaches the correct discharge pressure.  7️⃣ If the pump fail to reach the correct pressure, perform...