Skip to main content

What About Cooling Tower? Types Of Cooling Tower.

 

What About Cooling Tower? Types Of Cooling Tower.

 


Cooling Tower is basically a heat rejection devise or heat exchanger in which water and air are brought into contact with the purpose of lowering the temperature of the water. It’s not surprising that cooling tower technology lends itself to many applications including refineries, power plants, natural gas processing plants, and commercial, Heating, ventilation, and air conditioning(HVAC) systems. 

Despite the fact that the basic cooling tower operating concept is easy to grasp, simply air interacting with water, like any other form of machinery proper maintenance, is required for optimal performance. Even so, problems can develop and troubleshooting, and repair will be required.


# Here are a few potential problems:- 

  • In the water, the temperature rises unexpectedly. 

  • There is excessive vibration or noise. 

  • The cooling capacity has lowered unexpectedly.

  • The water carries over the specified level. 

  • The water conductivity is not within the acceptable range.

  • The motor temperature is too high. 

  • The water flow is reduced below specification. 

  • There is an unexpected water loss. 

 

# Main Types of Cooling Towers:-

=> Based On Air Flow:-

01- Cross Flow. 

02- Counter Flow. 

=> Based On Air Draft:- 

01- Natural Draft.

02- Mechanical Draft:-

(a)- Induced Draft.

(b)- Forced Draft.

 

Please take a look at the following links:

What Is Strainer? Types of the strainer.

What Is Lubricant And Properties Of Lubricant?

The Steam Turbine, And How It Works?

What Is Rupture Disc, How It Work?

What is Critical Point, Surge Point, Yield Point, Aniline Point, Triple Point, Triple Point Of Water, Melting Point, Auto Ignition Point?

What Is Fire Point, Smoke Point, Freezing Point, Dew Point, Flash Point, Pour Point, Boiling Point, Bubble Point?

Different Type Of Boiler. Boiler Operation And Operation Coefficient.

Pump Cavitation And Prevention.

Pumps & How It Works?

Centrifugal Pump & Troubleshooting.

Let’s We Know About What Is Seal And Types Of Seals.

Personal Protective Equipment (PPE). Types Of PPE.

Safety Measures Associated With Confined Space.

Explosion Hazard And How To Prevent It?

How To Prevent Fire Hazards In The Workplace?

Accident And Its Prevention In Work Place.

Occupational Hazard And Safety Requirements In Industries.

What Is Gas Hydrate? How To Prevent It?

What Is Filter Or Separator? Types Of Filters.

Let’s Know About Plumbing Fittings Or Pipe Fittings.

 

Comments

Popular posts from this blog

General Checklist List for Pre-start and Starting up the Centrifugal Pumps.

General Checklist the Essential Steps and precautions for Pre-start and Starting up the Centrifugal Pumps . # What’s the things you Should be attention physically? # General centrifugal pump start up procedure:- Before pump start-up you must perform these tasks:- *01.  Open the suction valve , do priming by venting all the air inside the suction line by opening any vent or even the PG vent till liquid coming out then close , now you confirm no air inside the system to reduce the chances of pump getting cavitation *02.   Open any re-circulation  or cooling lines. *03.   Fully close or partially open the discharge valve, depending on system conditions. *04.   Start the driver. *05.   Slowly open the discharge valve until the pump reaches the desired flow. *06.   Check the pressure gauge to ensure that the pump quickly reaches the correct discharge pressure. *07.   If the pump fail to reach the correct pre...

Different Types of valves

Different Types of valves Different Types of valves uses in different sectors. 1.  Globe valve:- 2.  Gate valve:- 3.  Ball valve:- 4.  Butterfly valve:- 5.  Diaphragm valve:- 6.  Plug valve:- 7.  Needle valve:- 8.  Angle valve:- 9.  Pinch valve:- 10.  Slide valve:- 11.  Flush bottom valve:-   12.  Solenoid valve:- 13.  Control Valve:- 14.  Flow regulating valve:- 15.  Back pressure regulating valve:- 16.  Y-type valve:- 17.  Piston valve:- 18.  Pressure regulating valve:- 19.  Check valve:- PLEASE READ MORE..... Industrial Catalyst And Classification. Electrical Hazards And Precautions. Renewable, Sustainable, Clean, or Green Energy. What Is Renewable Energy Or Renewable Resources, Or Clean Energy? Standard Operating Procedure (SOPs) Of The Steam Turbine. What Is Vacuum Hazard? Power Plant And Types Of Power Plants...

What is Fire Point, Smoke Point, Freezing Point, Dew Point, Flash Point, Pour Point, Boiling Point, Bubble Point?

# Fire Point :-  The lowest temperature at which the vapor of that fuel will continue to burn for at least 5 seconds after ignition by an open flame. #Smoke Point:-   The temperature at which, under specific and defined conditions, an oil begins to produce a continuous bluish smoke that becomes clearly visible. #Freezing Point:-  The temperature at which water changes phase from a liquid to a solid. # Dew Point:-   T he temperature at which air is saturated with water vapor. # Flash Point:-  T he lowest temperature at which enough fluid can  evaporate to form a combustible concentration of gas. #Pour Point:- The lowest temperature at which the oil will pour or flow when it is cooled without stirring. #Boiling Point:-   The temperature at which the vapor pressure of a liquid is equal to the pressure of the atmosphere on the liquid. #Bubble Point:-   The temperature wh...

Industrial Catalyst And Classification.

Principle Of Industrial Catalyst And Classification Of Catalyst.   Principle Of Industrial Catalyst : An industrial catalyst is a substance that accelerates a chemical reaction without undergoing any significant change in its own chemical composition. Catalysts work by lowering the activation energy required for the reaction to occur, thereby increasing the reaction rate. They provide an alternative pathway for the reaction to take place, which requires less energy and allows the reaction to proceed at milder conditions such as lower temperatures and pressures. Industrial catalysts are used in a wide range of chemical processes, including petrochemicals, refining, polymerization, and environmental applications. Classification Of Industrial Catalyst : Industrial catalysts can be classified into four main groups: 01. Homogeneous catalysts. Homogeneous catalysts are soluble in the reaction medium and are used mainly in the production of fine chemicals and pharmaceuticals. 02. Heteroge...

Difference between LNG, LPG and NGL

✅ LNG — Liquefied Natural Gas, is gas that has been Liquified at very low temp. and is transported as a liquid. It’s Primarily methane ,NG is a mixture of HC which, when liquefied, form a clear colorless,odorless liquid; it’s usually transported and stored at a temp. very close to its boiling point at atmospheric pressure (~ -160), The actual composition of LNG will vary depending on its source and on the liquefaction process, but in all cases the major is methane with small percentages of the heavier HC such as ethane, propane, butane and pentane ,N2 may be present.  ✅ LPG — Liquefied Petroleum Gas gas that is liquid near room temperature and at some extent of pressure. This product has very little methane and butane and is primarily propane (C3),LPG is more dense (has a higher specific gravity) than natural gas ,Their common characteristic is that they can be compressed into liquid at relatively low pressures ,The two most common LPG constitutes are Propane and Butan...